How to Build a Shelf Utilizing Brackets

Brackets are available in a myriad of shapes and sizes. Using brackets to assist and create a shelf permits the shelf to be coordinated with the room decor, be custom-sized, and be constructed by an intermediately expert home decor DIY-er. A number of shelves, staggered on a wall, make a serious design statement. A shelf placed above a door is a discovered-area storage answer, and a series of cabinets running around a room’s perimeter, high on a wall, can make a lateral book case for a small library.

Step 1

Choose brackets that will accommodate the chosen shelf. A typical shelf is 12 inches deep. This is the measurement from the entrance of the shelf to the wall. Brackets are basically “L” -formed; one leg of the L is connected to the wall, the opposite leg, which protrudes from the wall at a 90-degree angle, helps the shelf. The size of the protruding leg have to be no less than -thirds of the depth of the shelf. For instance, if the desired shelf is 12 inches deep, the supporting legs of the bracket must be no less than 8 inches. Often, each legs of the brackets are the identical length; however this shouldn’t be a hard rule.

Step 2

Select the number of brackets to make use of for the shelf. If the brackets are spaced too far aside, the shelf will sag. A superb rule of thumb is to position a bracket each 16 inches. Place one at each end of the shelf, 1 inch from the outside edge, and every sixteen inches along the shelf length.

Step three

Mark the wall, with the self-erasing marker, on the position of the underneathside of the shelf. Measure the space from the ground to this mark. The ninety-degree angle of the bracket will probably be aligned with this mark. The shelf will sit on the legs of the brackets that protrude from the wall at this mark. Mark the wall, measuring up from the ground, at 16-inch increments, one location marker for each bracket and one mark for each of the end brackets.

Step 4

Set up the brackets onto the wall on the indicated bracket locations, following the producer’s directions for attaching the brackets to the wall.

Step 5

Place the shelf, centered, on high of the brackets and insert screws up via the brackets into the underside of the shelf to secure it into position. It is helpful to pre-drill the screw holes to forestall a wood shelf from splitting.

If you liked this article therefore you would like to acquire more info with regards to Fireplace Mantel Brackets i implore you to visit our website.